Spray Foam Roof System

(The Most Energy Efficient Roofing System Ever)

Foam Roofs are Lightweight, Durable, and Seamless

A foam roof is applied as a liquid and within seconds the polyurethane will expand to 20-30 times its liquid size and creates a closed cell insulation material unlike any other insulation available. Spray foam creates a tight bond to your roof. The most common foam roof is 1.5” thick and is spray applied on the roof surface as a closed-cell polyurethane insulation applied directly to the existing roof surface. It is the only roofing system on the market that is completely seamless. Regardless of the roofs size there will not be any seams to leak. It provides a monolithic and seamless solution to your problematic roof and prevents any leaks in the roof.


We see ponding water on most of the roofs we inspect. A Spray Foam Roof will eliminate or minimize the ponding water on a roof surface. Foam can be sprayed at various thicknesses allowing us to build up the low areas that cause the ponding water.


Spray Polyurethane Foam (SPF) is by far the Best Insulator you can buy. A 1.5” thick foam roof will protect your roof from the harmful heat from the sun. With the highest R-value in the industry a foam roof will provide an R 6.5 per inch of thickness, which is double that of all other insulation types (fiberglass, cellulose, EPS, etc.)

The R-value test does not consider some very significant energy loss factors.

  • Air infiltration: is not taken into consideration in the R-value test. Traditional insulations like fiberglass and cellulose are porous and will allow air to filter through them. Spray Foam Roofs stop that air infiltration through the roof system.
  • Moisture accumulation: Porous insulations like fiberglass and cellulose will allow moisture to absorb into the insulation like a sponge. Spray foam does not allow moisture intrusion or moisture to absorb in the insulation.
  • Stack Effect: Air will rise and with traditional insulation it will escape through your insulation. Spray foam stops that heat loss and keeps your conditioned heat and cooling inside your building saving you money on energy costs.
  • Seams in Insulation: Traditional insulations all have seams, which provide significant energy loss. Spray foam is seamless and will not allow your conditioned air to escape the building, which will provide you significant energy savings.

Check out the Benefits of a SPRAY FOAM ROOF!

  • Tax Benefits: You may qualify for a significant tax deduction for having an energy efficient roof.
  • Energy Efficient: Spray Foam is 92% efficient and can cut your energy bills up to 40% (That’s over 500% more efficient than Tar and Gravel, EPDM, and Modified Bitumen Roofs)
  • No Energy Loss: 60-70% of your heating/cooling is lost through your roof spray foam stops that energy loss!!!
  • No Capitalization: Spray Foam Roofs can be expensed in one year instead of being capitalized (in most cases).
  • ROI: Most building owners experience an average of 4 ½-year return on their investment.
  • Affordable: The installed cost is less expensive than other commercial roofing systems, and the benefits for Spray Foam Roofing systems far surpass the competition.
  • No Heat Transfer: 2” of foam will stop over 240° of temperature from passing through it. Since Spray Foam does not allow radiant heat transfer, it lowers the surrounding air temperatures in the building.
  • Comfortable: Less radiant heat inside the building increases the comfort of the building occupants; increasing productivity. Lowers inside building temperatures up to 12°.
  • Less HVAC Maintenance: Reduces wear and tear on your HVAC equipment since it runs less often.
  • No Mold: Spray Foam has no food value, so it inhibits the Growth of Mold and Mildew.
  • No Air Leakage: Spray Foam stops air and moisture infiltration by filling every nook and cranny in the building structure.
  • Low Life Cycle Cost: Spray Foam has the lowest life cycle cost as compared to all other types of roofing systems.
  • Strength: While lightweight, spray foam is very strong. It can even double the strength of a building structure. Spray Foam Roofing Systems have earned a great deal of respect since hurricane Andrew. Spray Foam has even been touted as being “Hurricane Proof”.
  • No Off-Gassing: Spray Foam is permanent and will not off gas or lose its R-value.
  • Healthy & Safe for the Atmosphere: VOC Compliant – Contains no ozone depleting agents. Spray Foam is considered a GREEN BUILDING PRODUCT. Helps keep rodents, dust, bugs, and pollen out. Lowers allergens typically found in the home or building. Contains NO Formaldehyde, which causes cancer.
  • Sustainable: Provides a fully sustainable roofing system with a renewable warranty, allowing you to re-coat the roof rather than tearing it off; saving you money for years to come.
  • Seamless: SPF is a seamless system. There are no seams or joints to allow water, heat or air to enter the building through the roofing system. Regardless of building size or shape there will be no seams. Spray Foam Roofs are leak free.
  • No Fasteners: Since spray foam adheres tenaciously to most surfaces, it is fastener free leaving no room for roof leaks due to fasteners coming loose and poking holes in the roof membrane.
  • Self-Flashing: Due to the ability of spray foam to conform to whatever surface it is applied to, SPF is ideal for flashing parapet walls, roof penetrations, and roof mounted equipment; such as HVAC equipment, vent stacks, pipes, skylights, etc. The self-flashing ability of polyurethane foam eliminates roof leaks caused by faulty flashing.
  • Lightweight: SPF roofing systems weigh approximately 42 pounds per 100 square feet compared to 600-1000 pounds per 100 square feet for conventional BUR, Tar and Gravel systems or Ballasted EPDM systems. Spray Foam is ideal to apply over existing BUR minimizing additional weight. In fact, the gravel removed from the existing BUR roof will exceed the weight of the new spray foam roof by about 10-15 times.
  • Insulates: Polyurethane foam has the highest “R” value of any roofing product on the market. With an “R” value of 6.5 per inch of thickness it enables us to provide more thermal resistance with less material than any other product.
  • Minimizes Ponding Water: A unique advantage of spray foam is the ability to slope the existing roof to allow ponding water to be redirected to the roof drains/scuppers by adding an increased thickness of foam in low areas. This means that each roof can be individually designed to meet the customer’s needs.
  • Versatile: Spray Foam is an ideal system to insulate roofs, tanks, coolers, piping, ductwork, freezers, and perimeter wall insulation for new construction homes or commercial buildings. SPF can be used on new roofs as well as re-roofing projects. It can be used on surfaces whether they are flat, pitched, domed, metal, wood, concrete, etc.
  • Water Tight: The closed cell structure of spray foam resists the penetration of water. It is a US Coastguard approved material for flotation. Closed Cell Spray Foam is the only FEMA approved material for flood zones.
  • Flexible: Polyurethane foam has the ability to withstand the strain of normal expansion and contraction of a structure without affecting the ability to remain adhered and sealed, protecting the structure from outside elements.
  • Long Life: Spray Foam Roofing Systems have been around since 1968 some of which are still performing today. SPF roofing systems are renewable. While other systems must be removed and replaced after their normal life expectancy (8-15 years), SPF only needs to be repaired and re-coated saving you money.
  • Ease of Application: SPF roofing systems can be installed in a relatively short period of time with no disruption of building operations.
  • Lowers Surface Temperature: On a 95° day a typical black rubber (EPDM), tar & gravel, or Built-up (BUR) roof can reach up to 190° at the surface. Many times we have seen a reflective coating over our SPF roof maintain less than 90° on the surface, which was less than the ambient temperature outside. The white coating is highly reflective and helps lower energy costs to the building owner.
  • Excellent Track Record: With a 40-year perfect track record how can you go wrong.


If you can find another roofing system that will match all 28 points here, we will install your spray foam roof free of charge.
Simply put, there is no other roofing system on the market that will outperform our Spray Foam Roofing System; it is literally not possible.

Richard Tooley
Elite Roof Systems LLC